Model Number

LM

WHAT IS FILM LAMINATION?

Most types of thin plastic film, including cellulose acetate, oriented polypropylene, polyester and P.V.C., Reel fed and adhesive bonded to paper or board.

PRINT FEEDING

Sheets of Printed matter are fed continuously to the laminating station by hand fed on the conveyor table. An adjustable underlap of sheets is accurately maintained at all lamination speeds. A self-adjusting head allows for wide variations of thickness in the print stock.


Click here to view bigger image

FILM AND ADHESIVES

Solvent type adhesives are normally used. The film is fed from an adjustable unwind shaft through a reverse roller coating head fitted with adjustable roll. The film wed can be raised from the coating roller without stopping the machine. The adhesive is continuously circulated and filtered on each return cycle to the reservior.

LAMINATION

The adhesive coated film is dried by passing over the heating chamber thermostatical controlled and by blown hot air. The film bonded to the printed sheets between the chromed steel and rubber laminating pressure rollers.

DELIVERY

Delivery of finished lamination is through the back of the laminator to rewind shaft. Sheet may be separated immediately if desired.

ELECTRIC CONTROLS

Electric Controls are housed in a neat desk mounted unit easily controlled by operator.

MAINTENANCE

Maintenance is minimum and access to all parts of the machine is quick and simple. Window doors at the front and rear of the machine allow full visibility during operation.